Long version front view in wool mix jacquard.
Long version back view.
Short jacket version in boiled wool
You can buy a pattern via my website, click on the link below
A stylish unlined duster coat/coatigan, round neck in two lengths; long or jacket length, with rounded pocket details, three or four covered buttons with large snap fasteners and the three quarter length sleeves gives an air of a bygone era.
Make in woollens such as wool mix jacquards and checks or plain boiled wool in vibrant colours for Autumn/Winter or Linen and Linen mix fabrics for Spring/Summer. Its a versatile pattern for all seasons!
Why not team up with jeggings, jeans, long skirts and a polo neck top for a sixties look.
8 Templates: FRONT, BACK, SLEEVE, FRONT FACING, BACK FACING, POCKET, POCKET LINING and BACK BELT
Here is the measurements guide:
Sew 1cm seam allowance unless otherwise specified. Finish raw edges with an overlocker or zigzag stitch. Topstitching –sew 4mm approx. from seam with a straight stitch length at 2.8mm. Stay stitching- a line of straight stitch to prevent stretching
WORKING WITH BOILED WOOL TIP: pop a walking foot on your machine and use a ballpoint needle no.90 which helps give a better sewing experience
HOW TO MAKE URSULA COATIGAN
SEWING THE BACK BELTThe Back belt is optional but I think its nice feature to the rear angle! Stitch down each side, then turn inside out. Press.Top stitch down each side.Pin the back belt to the back piece at each side. Machine tack within the seam allowance.
SEWING THE NECK FACING
Sew the (interfaced) facing pieces RST. Press the seam allowances open. Finish the outer edge.
SEWING THE POCKETS
Finish the outer edge of the pockets and pocket lining pieces. Pin the pocket piece at each side matching the curved edge. Sew. Clip the seam allowances.
Turn to the WS and topstitch 1cm away from the edge..Pin the pocket lining piece to the pocket at the outer edge. Sew.Tack stitch at the sections above the pocket curve to secure.
SEWING THE FRONT TO BACKPin, then sew the front to back at the shoulder edges. Finish the raw edges together. Press towards the back. Top stitch on the right side. Staystitch around the neck edge.
Sew the front to back at the side edges. Finish the raw edge. Hem the lower edge of the front and back piece.Pin the facing to the Front at the top side edge. Sew. Press the seam allowances open.
Pin the neck facing to the neck edge, match up the cross seams. Hand tack stitch all around the neck edge. Sew.Nick the seam allowance all around.Fold over to the reverse side. Hand tack stitch around the neck facing. Fold over 1cm at the centre front edge. Press. Hand tack stitch down the front to secure.
Stitch around the neck facing and down each long centre front band.
SLEEVESPin the sleeves RST at the long side edges. Sew. Finish the raw edge. Press. Turn under the cuff hem, press, pin. Stitch.
Pin the sleeve to the body, align the back of the sleeve head (see template) to the back. Sew. Finish the raw edge. Press. Topstitch on the RS.Pin, hand tack the pocket to the body. On the reverse side, stitch around the pocket with a longer stitch length. This will define the pocket on the RS. Like this……
Cover the buttons then stitch on some large snap fasteners in the position as shown on the template.
There you have it!