SUMMER HAT

Screen Shot 2016-02-05 at 15.45.55                                         templates available to buy from http://www.sewgirl.co.uk IMG_1437

A fun hat project and bag and sunnies case to match. I used gorgeous “Aunties Attic’ fabric by Robert Kaufman but you could use any thicker cotton fabric such as cotton, denim, canvas or corduroy. Simple to make, the bag and purse have a magnetic clasp flap with button.

The hat comes in two brim sizes small (pictured) and large and fits a 57cm size head.

You will need: a sewing machine, an iron, needle and thread, pins and scissors.

MATERIALS REQUIRED: Hat (small brim)= 50cm main fabric, 20cm lining fabric and 50cm of med weight fusible interfacing.
Hat (large brim)= 60cm main fabric, 20cm lining and 60cm med weight fusible interfacing.

HAT PATTERN PIECES: CROWN, SIDE PANEL and BRIM (short or large).

PATTERN LAYOUT Screen Shot 2016-02-05 at 15.37.36

3

CUTTING OUT THE PIECES- In the main fabric cut two BRIM pieces following the fabric layout as shown in DIAG A. ie place pattern pieces adjacent to the fold. Cut one BRIM piece in interfacing with pattern placed against the fold.
Now open fabric out and following the fabric layout DIAG B cut one SIDE PANEL in outer fabric, one piece in lining fabric and one in interfacing. Cut notches as indicated.

Cut out one CROWN piece in main fabric (DIAG C), one piece in lining and one in interfacing cut notches as indicated.

4JPG

SEWING THE CROWN -Trim off 1.5 all around all the interfacing pieces outer edges then iron on to the main fabric pieces of crown, side panel and one of the brim pieces.

Screen Shot 2016-02-05 at 15.38.27
Fold the side panel in half with the right sides together (RST) and pin together at short side, then stitch a 1.5cm seam. Press seam open.

Pin the outer crown to side panel at notched edge with RST starting at the side seam, nick the edges of the side panel and crown so they fit snuggly together matching the notches as you go.
Tack stitch to hold pieces in place, then stitch on the machine with a 1.5cm seam allowance careful that you don’t stitch any folds into the seam.

9JPG
Repeat in the same way for the crown lining and side panel so you have identical ‘caps’ in outer and lining fabrics.
Top stitch the main fabric ‘cap’ on the RS by stitching 4mm
below the seam.

5JPG

SEWING THE BRIM – Take your two brim pieces and with the RST pin together at the short side then stitch a 1.5cm seam so you have two rings. With the RST pin the two brims together at the outer edge then stitch all around a 1.5cm seam.

Now trim this seam allowance to 6mm (1/4”) approx. Turn the brim inside out so the right side of the fabric is visible. Press and push out the seam edges all around and pin together the raw edges at top.

7JPG8JPG

So back to the machine, adjust your stitch length to 3 and stitch lines all around your brim approx 1.5cm apart from the raw edge to the brim edge. Sew in ends. Press.

ATTACHING THE BRIM TO THE CROWN- Pin the raw edges of the brim to the raw edges of the outer side panel ‘cap’, start at the side seams then pin all around. Tack stitch to hold in place making sure the raw edges are lined up, clip seams if required. Stitch a 1.5cm seam all around hat. Press seam flat then top stitch on the RS if you fancy it.

1011JPGATTACHING THE CROWN LINING – Take the hat lining ‘cap’ and fold over the raw lower edge 1.5cm. Pin to the inside of the hat at the join wrong sides together. Hand stitch all around with little stitches so they are not too visible then turn your hat inside out and there you are one lovely hat!HAT by Sewgirl JPG

Copyright Sewgirl 2015 This pattern is not for commercial use www.sewgirl.co.uk
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s